There are many comparative advantages between hydraulic distributor and traditional concrete pouring. At present, most construction units and construction units prefer this kind of intelligent concrete pouring equipment, which not only improves the construction efficiency, but also strengthens the safety factor. Let's take a look at the advantages of hydraulic distributor

   1. Flexibility: the boom of the hydraulic distributor is currently "R-shaped folding arm" and "Z-shaped articulated arm". When pouring on the floor or column, the protruding steel structure will not affect the rotation of the boom. The ordinary distributor can only carry out horizontal pouring, and it cannot avoid or cross obstacles. The hydraulic distributor can freely retract and rotate to cross obstacles.

   2. Easy to use: the hydraulic distributor is an intelligent concrete pouring equipment operated by remote control. When pouring on the floor, the steel bars linked on the floor are bound with iron wires. Stepping on them will deform and detach, which will affect the quality of the floor. Therefore, many projects prohibit people from walking on the steel bars. The use of wireless remote control can avoid the walking of construction personnel, and can achieve the effect of playing wherever they point, To improve the construction efficiency, the traditional distributor should use the tower crane to move, and also change the direction of the pipe and traction rope.

   3. Construction efficiency: the traditional distributor construction requires more than 3 people to pour. Without pouring within a certain range, it needs to move or use the traction rope to change the direction, which wastes time and personnel cost. The hydraulic distributor can be poured at one time and rotate 360 degrees hydraulically, which fully achieves the effect of intelligent concrete pouring.

4. Safety: the installation mode of hydraulic distributor: fixed installation of formwork, installation in elevator shaft and floor opening installation. No matter which installation mode is adopted, the construction can be carried out only when the safety factor is reached. The construction can be carried out under level 6 wind, and the ordinary distributor cannot achieve this effect. There is no need to worry about the potential safety hazards of vibration caused by concrete pouring, and the ordinary distributor cannot operate in this way.